Mechanical
Coag Panel
Plasma
RCHSD Coagulation
LAB00030
As received
4 hrs
1 hr
2.7 ml blood
Light Blue (Sodium Citrate)
1. The preferred method of specimen collection for coagulation studies is a properly performed VENIPUNCTURE. The specimen may be collected directly into 1.8 or 2.7 mL vacutainer or into a syringe and then transferred immediately into a 1.8 or 2.7 mL vacutainer. 2. The vacutainer tube MUST contain the EXACT amount of blood. It is essential that LT blue top tubes are PROPERLY FILLED. Volume is CRITICAL and the blood (9 parts) to liquid anticoagulant (1 part) must remain intact for correct results. 3. The specimen should be transported to the Laboratory within one hour of collection. 4. SPECIAL INSTRUCTIONS FOR SPECIMENS COLLECTED FROM A LINE: If collecting specimens for coagulation studies from an indwelling line that may contain heparin, it is recommended that the line should be flushed with 5 mL of saline and the first 5 mL of blood or 6-times the line volume (dead space volume of the catheter) be drawn off and discarded before the coagulation tube is filled. For those samples collected from a normal saline lock (capped off venous port) twice the dead space volume of the catheter and extension set should be discarded. 5. Stability - Specimens are stable for 4 hours following collection.6. If patient's hematocrit is greater than 55%, contact hematology lab to request a light blue tube with adjusted anticoagulant amount.
Room Temp: 4 Hours
Underfilled or overfilled tubes, clotted or refrigerated specimens.
1.8 mL or 2.7 ml lt blue top
1.8 ml citrated blood in 1.8 ml lt blue top
Centrifuge within one hour of collection
Fibrinogen, PT with INR, aPTT
85610, 85730, 85384
12-08-17
JZ